Filter
Top Products
8
SCANNING
When rst used, your radio scanned the DAB band for
available stations. The station services found were then
stored in your radio’s memory.
You can re-scan the band at any time if you move to a dierent
area or just to refresh the stored list of available stations.
Two types of scan are available, a Local Scan that scans UK
DAB bands for available services and a Full Scan, that scans
all bands.
TO START A SCAN
Switch on the radio and select the DAB band.•
Press the • MENU button briey.
The radio will now display the legend ‘Manual tune’.
Rotate the • VOLUME/SELECT knob to display your choice
of scan - Autoscan local or Autoscan full.
Press the • JOG MODE/SELECT button to start the scan.
The scanning display will be shown while the scan takes place.
SLEEP MODE
THE SLEEP FUNCTION
The Sleep function allows you to program your radio to
switch itself o after a set period of 90, 80, 70, 60, 30 or 10
minutes.
To activate the Sleep function:
Press the • SLEEP button.
The display will show Sleep 90 min.
Now press the • SLEEP button repeatedly until your
required sleep time appears on the display.
After a few seconds the Sleep display will disappear and the
‘SLEEP’ symbol will appear on the display with conrmation of
the sleep minutes you set (8=80 minutes, 6=60 minutes etc).
MANUAL TUNING
If preferred, you can also tune to a DAB multiplex manually to
check the available signal strength.
To Manually tune:
Press the • MENU button briey.
The radio will now display the legend ‘Manual tune’.
Press the • JOG MODE/SELECT button to select manual
tuning.
Rotate the • VOLUME/SELECT control to browse the DAB
multiplex channels.
Press the • JOG MODE/SELECT button to display
information about a multiplex channel.
If a station multiplex is located on the selected channel, the
multiplex name and frequency will be displayed above a signal
strength bargraph.
Your radio will continue to play, then will set to Standby
when the sleep time expires.
To cancel the Sleep function once set:
Press the • SLEEP button once during Sleep mode.
The display will show ‘Sleep o’.
Sleep symbol Sleep minutes symbol
A bargraph shows scan progress and the number of services
found is displayed.
Number of stations found
Progress bargraph