30
You can set the unit to turn on at specific times.
< Adjust the clock before setting the wake up timer
(page 15).
Setting the wake up timer
1
If the unit is on, press the STANDBY/ON (
)
button to turn it off.
2
Press the TIMER button repeatedly until
“ALM SET” appears on the display.
The clock hour value blinks.
< If no button is pressed for 30 seconds, the timer
setting mode will be cancelled.
3
Press the VOLUME ( + / – ) buttons to set the
hour, then press the TIMER button.
The clock minute value blinks.
Note for use with an iPod touch
(When using SR-100i wake up timer with an iPod
touch as the source)
< If you turn the power of the iPod touch off (“Slide
to power off”), you cannot use it with the wake up
timer even if it is docked in this unit. To use the wake
up timer with an iPod touch as the source, do not
select “Slide to power off” on the iPod touch. (The
screen of the iPod touch can be turned off without
any problem.)
< If Video is displayed on the iPod touch’s screen, you
cannot use it with the wake up timer even if it is
docked in this unit. To use the wake up timer with
an iPod touch as the source, select any item other
than Video on the iPod touch.
4
Press the VOLUME ( + / – ) buttons to set the
minute, then press the TIMER button.
The current setting value blinks.
5
Press the VOLUME ( + / – ) buttons to select “ON”,
then press the TIMER button.
The timer set has been set. “ON” and the current time
is displayed.
When the setting time arrives, the last selected
source starts playback.
< To turn off the wake up timer, select “OFF” in step
5
.
When the timer reaches the timer-on time, the unit
is set to “SLEEP 60” automatically and the power will
be switched off (standby) 60 minutes later.
If you want to listen continuously, press the SLEEP button
repeatedly to select “--” after reaches the timer-on-time.
Wake Up Timer