Filter
Top Products
TASCAM CD-RW901MKII 31
5 − Recording
Copy-protection
The CD-RW901MKII allows copy-protection to be applied to
the discs produced. Naturally, the copy-protection applies only
to digital-to-digital copies.
There are three settings:
•
Free (may be freely copied), where no copy-protection is
applied to the recorded disc.
•
1Gen (single-generation copying), where one digital
copy (“child”) can be made from the recorded disc, but
no digital copies (“grandchildren”) can be made from
the child.
•
Prohi (copy prohibited) which prevents any digital
copies being made from the recorded disc.
•
Origin (SCMS:Serial Copy Management system)
which applies CCI (Copy Control Information) to the
recorded disc.
Use the COPY ID option in the REC sub-menu to set the
function on (see “Operation basics” on page 16).
Turn the MULTI JOG dial to select the desired settings.
NOTE
Copy-protection applies on a “per-track”, not a
per-disc basis. This means that you can apply different
copy-protection levels to different tracks (but you can’
t apply different copy-protection levels to different
parts of the same track). If copy-protection is impor-
tant to your work, you may want to check this setting
every time you make a recording, to ensure that you
have the protection level that you want.
Restricting the number of tracks
When making a recording, it is possible to restrict the number
of tracks that nay be recorded at one time.
At any time within record or record ready mode, turn the
MULTI JOG dial to display the track numbers you want to
record.
The maximum number that can be entered is 99 tracks.