Filter
Top Products
1. Disconnect the cable from your vehicle's negative (-) battery
terminal.
2. To open either fuse holder, unlatch the two latches on the fuse holder
until it springs apart.
3. Slide off the metal holder on each end of the fuse and remove the
fuse.
4. If the fuse is blown, replace it. Use only standard 1-1/4 inch fuses
with the proper rating. The red +12V TO IGNITION wire's fuse must be
0.5 amps. The yellow +12V TO BATTERY wire's fuse must be 12 amps.
CAUTION: The supplied spare fuses have the correct rating. If you
use a fuse with an incorrect rating, the stereo could be
damaged.
5. Reassemble the fuse holder by squeezing it together until it latches.
6. Reconnect the cable to the vehicle's negative (-) battery terminal.