Filter
Top Products
AM/FM/CD Weather Band Car Stereo
(120-2157) Operation Faxback Doc. # 58423
Turning the Stereo ON and OFF
To turn on the stereo, press PWR. The radio automatically tunes to the
last station and band selected. To turn off the stereo, press PWR again.
Setting the Clock Display format
Your stereo's clock is factory set to display the time in a 12-hour
format. Follow these steps to change the clock display to a 24-hour
format:
1. Turn the stereo off and leave the vehicle's ignition on.
2. Hold down DISP for about 2 seconds. The digits on the display flash.
3. Within 5 seconds, press 1 SHUFF to change the clock display to a
24-hour format. 24 HR lights.
4. Repeat Steps 2 - 3 to return to the 12-hour format. 12 HR lights.
Setting the Time
1. Turn the stereo off and leave the vehicle's ignition on.
2. Press DISP for more than 2 seconds. The hour digits flash.
3. Repeatedly press (or hold down) + or - until the stereo displays the
correct hour.
Note: If you do not press + or - within 5 seconds, the regular time
display returns.
4. Press DISP again, the minute digits flash. Repeatedly press (+) or (-)
until the stereo displays the correct minute. (To continuously advance
the minute, hold down + or -.)
Setting the Display
While you are playing the radio or a CD, the display show the tuned
frequency or information about the current CD. To display the clock at
any time while the radio or a CD is playing, press DISP.