Filter
Top Products
32
Installation Manual
CHAPTER 3
Under • Shutdown UPS:, select OFF to totally shut
down the UPS once the low battery condition of the
UPS is reached. Select ON in order for the audible
warning sound to continue once the UPS is shut down.
Select • Confi rm once the UPS settings are completed.
Once all of these settings are done, click Logout to fi nish
the process.
Confi guring the TGM-100 with the
TGM-HDC
With the IP Address confi gured and the units all connected,
the installer must now confi gure communications between
the TGM-100 and the TGM-HDC.
From the TGM-100's Web UI or the TV UI, select the •
Installer Settings screen as previously described.
Select • Set Up, then Settings.
Select • External Storage Settings.
Select • Credentials, then Edit.
Enter the • IP Address found on the Display Window
found on the front of the TGM-HDC, followed by the
Admin User Name (admin) and the Admin Password
(en91n3). Use no spaces and separate each with a
comma. For example: 192.168.0.198,admin,en91n3.
For systems with multiple TGM-HDC iSCSI •
devices, use a semicolon without spaces
between the credentials of each device. For
example: 192.168.0.198,admin,en91n3;
192.168.0.199,admin,en91n3;
192.168.0.200,admin,en91n3;
192.168.0.201,admin,en91n3
Once the Credentials are entered correctly, select •
OOK.
Resetting the System
Should you decide you want to remove all the media from
your TGM-100’s external storage device, or to revert all
settings to their factory defaults, you can do so via the
System Information screen.
Navigate to the • Admin UI as described previously.
Select • System Information.
The System Information screen will be displayed:
Press• M Reset System.
The Reset System screen will be displayed.