Filter
Top Products
Other operations38
GB
Using the timer
Waking up to the radio or buzzer
— Standby function
You can wake up to your favorite radio program using the Standby
function. You can preset different frequencies and standby times to
STANDBY MEMORY a and b.
To wake up to the buzzer, see “To wake up to the buzzer”, page 40.
Make sure the clock is set correctly before using the Standby function
(page 12).
1 Tune in to the station you want to preset.
2 Adjust VOL to your choice.
3
Hold down ENTER and press STANDBY MEMORY a
or b.
When ENTER is held down, “PRESET
MY” will flash in the display.
A beep sounds when STANDBY
MEMORY a or b is pressed. The station
is stored to the selected button. The
STANDBY MEMORY number (a or b)
and the STANDBY MEMORY label are
displayed.
4 Press POWER ON/OFF to turn off the radio.
5 Hold down the STANDBY MEMORY button you
pressed in step 3 and press
–
1¿ or ÷1
+
repeatedly to
set the standby time (i.e., the time the radio is to turn
on).
“STANDBY” and “a” or “b” flash while the STANDBY
MEMORY button is held down.
6 Release the STANDBY MEMORY button.
“STANDBY” and “a” or “b” light
up and the standby setting is complete.
The clock indication returns to the
current time.
The radio turns on at the standby time
to receive the preset broadcast station.
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
MY DW VOA BBC OTH
VWX
8
YZ
9
<>
/
FM/
AM
ON/
OFF
POWER
0
ab
DISPLAY
AM BAND
LABEL EDIT
TIME SET
HOLD
LOCAL/
WORLD
TIMERSTANDBY/
STANDBY TIME SET
STANDBY MEMORY
TIME SET
TIME DIFF
SW STATION CALL
JOG/
TUNE/
SCAN˚
DIRECT
ENTER
DST
ERASE
SLEEP
LIGHT
SYNC
SSB
EXE
POWER
ON/OFF
ENTER
VOL
STANDBY
MEMORY
a/b
–|¿/÷|+