Filter
Top Products
Listening to the radio18
GB
Various ways of reception (continued)
Manual tuning
Use
–
1¿ ,÷1
+
or ¿ ,÷ to change the frequency manually step by step.
The outer buttons (
–
1¿ and ÷1
+
) change the frequency in large
frequency steps, and the inner buttons (¿ and ÷) in small frequency
steps.
1 Press POWER ON/OFF to turn on the radio.
2 Press FM/AM to select either band.
To listen to SW, MW or LW broadcasts, select AM.
3 For the AM bands, hold down AM BAND and press
–
1¿ or ÷1
+
to select MW (medium wave), LW (long
wave) or a meter band (short
wave).
The name of the band or the meter
band and its lowest frequency appears
in the display.
For FM, skip this step.
4 Press
–
1¿, ÷1
+
or ¿, ÷ repeatedly to tune in to the
desired broadcast station.
With each press, the frequency changes in the channel steps shown
below. (The figures in the parentheses indicate the steps in the SSB
mode).
Band
–
1¿ or ÷1
+
¿ or ÷
FM 0.05 MHz 0.05 MHz
SW 5 kHz (1 kHz) 1 kHz (0.1 kHz**)
MW 9 or 10 kHz* (1 kHz) 1 kHz (0.1 kHz**)
LW 9 kHz (1 kHz) 1 kHz (0.1 kHz**)
* The frequency step is adjusted automatically to your time zone
according to your local time zone setting (see “Automatic
adjustment of the MW channel step”, page 15).
** Units of 0.1 kHz are not indicated in the display.
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
MY DW VOA BBC OTH
VWX
8
YZ
9
<>
/
FM/
AM
ON/
OFF
POWER
0
ab
DISPLAY
AM BAND
LABEL EDIT
TIME SET
HOLD
LOCAL/
WORLD
TIMERSTANDBY/
STANDBY TIME SET
STANDBY MEMORY
TIME SET
TIME DIFF
SW STATION CALL
JOG/
TUNE/
SCAN˚
DIRECT
ENTER
DST
ERASE
SLEEP
LIGHT
SYNC
SSB
EXE
POWER
ON/OFF
FM/AM
AM BAND
¿/÷
–
|¿/÷|
+