Filter
Top Products
13
GB
Preparation
Preparation
4 Hold down TIME SET and press
–
1¿ or ÷1
+
to set
the local time.
Each time you press
–
1¿ or ÷1
+
, the current time will decrease or
increase by a minute.
To change the digits rapidly, hold down
–
1¿ or ÷1
+.
5 Release TIME SET.
“ : ” starts flashing and the clock
starts running.
To switch to clock display while the radio is turned on
Press EXE. The current time appears for about 10 seconds and
then returns to the previous display. Press EXE again to return to
the previous display manually.
The display will not switch to the clock while the radio is
running scan.
For areas adopting daylight saving time (summer time)
Press DST to light up the s indication if you are now in the
summer time period (step 3 in the previous page). If you are now
in the standard time period, press DST at the beginning of the
daylight saving time period. Press again at the end of the
daylight saving time period to clear the indication. The time
display will be adjusted accordingly.
Note
You cannot set the clock while listening to the radio.
If the radio is on, press POWER ON/OFF first to turn off the radio.
Tips
• The clock is displayed in the 24 hour system.
• Press TIME SET to stop the flashing of “0:00”.
• To adjust the time to the second, release TIME SET at the time of the
tone.