Filter
Top Products
41
3 Press ENTER.
The display changes as follows.
The information selected in step 2 appears in A and B.
A — track number, track name
1)
, or disc name
2)
.
B — the information selected in step 2.
1)
Appears only when “1 Remain” is selected and the track is labeled.
2)
Appears only when “AllRemain” is selected while the recorder is in stop
mode, and the disc is labeled.
z
If you want to check the remaining time or the recording position while
recording or in stop mode, see page 35.
Protecting your hearing (AVLS)
The AVLS (Automatic Volume Limiter System) function keeps down
the maximum volume to protect your ears.
1 Press ENTER, press <MENU, repeatedly until “AV LS”
flashes in the display, and then press ENTER again.
2 Press <MENU, repeatedly until “AVLS ON” flashes in the
display, and then press ENTER.
When you try to turn the volume too high, “AVLS ” flashes in the
display. The volume is kept to a moderate level.
To cancel AVLS
Select “AVLS OFF” in step 2.
Note
The Mega Bass function does not operate while “AV L S ” is set to “AVLS ON.”
ENTER
<MENU,