Filter
Top Products
Editing Recorded MDs
28
Labeling tracks and MDs with the remote
4 Repeat Steps 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
5 Press NAME again.
The entered title appears on the left side of the
display window after the label has been recorded.
To cancel labeling
Press p.
1 Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To select
To label
Make sure that the deck is
A track Playing, pausing, recording the track
to be labeled, or stopped after
locating the track to be labeled
An MD Stopped with no track number
appearing in the display
2 Select the character type as follows:
Press
Uppercase letters CHAR repeatedly until “Selected
ABC” appears in the display
Lowercase letters CHAR repeatedly until “Selected
abc” appears in the display
NUM repeatedly until “Selected
123” appears in the display
Numbers
3 Enter one character at a time.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
r
6
)0
+=
pP·
NAME
CHAR
0/)
CLEAR
NUM
p
Alphabet/number
buttons