Filter
Top Products
113
GB
Troubleshooting
When recording from other
equipment, the input level is
too strong or not strong
enough.
• Connect the headphone jack of other equipment to the
m (microphone) jack of the IC recorder and adjust the volume
level on the piece of equipment connected to the IC recorder.
Playback speed is too fast or
too slow.
• The playback speed is adjusted in DPC. Slide the
DPC(SPEED
CTRL)
switch to “OFF” or press SPEED+/– to adjust the speed in
DPC again (page 49).
You cannot divide a file. • You need a certain amount of free space in the memory to divide a
file.
• 199 files have been recorded in the selected folder ( ). Erase
some of the files (page 29) or erase all the files after you store
them on the other memory media or on your computer.
• Because of the system limitations, you may not be able to divide a
file at the very beginning or at the very end of the file.
• You cannot divide files other than those recorded using the IC
recorder (e.g., a file transferred from a computer).
The memory card is not
recognized.
• Since the memory card may contain image data or other files, the
memory required for creating initial folders is insufficient. Use
Windows Explorer, Macintosh desktop, or other tools to erase
unwanted files or initialize the memory card on the IC recorder.
• Switch the memory media of the IC recorder to “Memory Card”
(page 42).
• Remove a memory card and check the side of the memory card.
Then insert it with correct side and direction.
“--:--” is displayed. • You have not set the clock (page 15).
“--y--m--d” or “--:--” is
displayed on the recording
date display.
• The date of recording will not be displayed if you recorded the file
when the clock was not set.
Symptom Remedy