Filter
Top Products
The line input/output is selected as IN.
Put line input/output to the OUT side.
In Case of Malfunction
SymptomsSymptoms
CausesCauses
SolutionsSolutions
The power will not
come on.
No image appears on
the LCD screen or a
connected TV.
There is no sound.
The device will not
start playing.
The power cord is loose.
The battery has been drained.
The video cable is not connected firmly.
The display mode is set to [OFF].
The Brightness is set at minimum.
The input switch selected for a
connected television is not correct.
The input switch selected for a
connected audio device is not correct.
The audio cable is not connected firmly.
A disc in the machine will not play.
Parental Controls have been set.
The player is set on Hold.
The remote control did not come with
the device.
Direct sunlight or strong illumination is
striking the remote sensor.
Batteries are depleted.
The remote control signal does not
reach the player.
Insert the electric cord firmly into the outlet.
Recharge the battery.
Connect the video cable firmly to the jack.
Set the screen to a mode besides [OFF].
Adjust Brightness from LCD MODE .[ ]
Change the input switch of the connected television
so that images from the player appear on its screen.
Change the input switch of the connected audio
device so that audio can be heard from the player.
Connect the audio cable firmly to the jack.
Please put in a playable disc. Check the
disc type, colour system, and region code.
Reset or modify Parental Controls.
Slide the [HOLD] switch to the right to
remove the hold.
Point the remote control at the sensor and
stand an appropriate distance from the player.
Take care that direct sunlight or strong illumina-
tion does not striking the remote sensor.
Replace all remote control batteries with new ones.
Remove all obstacles between the remote
control and the sensor.
When buttons are pre-
ssed nothing happens.
The remote control is
not working normally.
50