Filter
Top Products
Stopping PlaybackStopping Playback
When a disc is playing, press [STOP].
Notes:Notes:
Do not touch discs that are still spinning when you open
the lid.
Take out discs after they have stopped spinning.
Resuming PlaybackResuming Playback
If “Resume” is displayed on the LCD screen after a disc
stops playback, then the player has recorded the point
where playback was stopped. Pressing [PLAY] again will
cause the disc to resume playback from that point. As long
as the disc lid is not opened, even if the power is turned off,
the player will resume playback from the point it was
stopped.
Notes:Notes:
If the power is turned off in resume mode and turned on
again, the player will automatically resume playing from
the point where it was stopped.
To turn off the resume function：
Press the [STOP] button again when the player is stopped.
When the power is turned on, open the disc lid.
PausePause
1. Press [PAUSE] while a disc is playing.
SearchSearch
1. When a disc is playing, press [SCAN/SLOW], to
enter Search mode.
or
Slow ＞＞＞＞ Fast
Scan Forward
Scan Reverse
3. Pressing the or button on the player main body will
have the same result as [SCAN/SLOW] or button
on the remote control.
Notes:Notes:
2. Repeatedly pressing [SCAN/SLOW] or will change
the speed of the Forward or Reverse function.
4. To Search Mode, press the button shown below.
Remote Control : [PLAY]
Player Main Body : [PLAY] or [ENTER]
exit from
Search speed differs with different disc being played.
There is no sound being played when in Search Mode.
Playing Discs (continued)
For VR mode disc, the player cannot automatically
resume playing from the point where it was stopped even
if the power is turned off and turned on again.
To exit from pause mode, press [PLAY] or [PAUSE].
26