Sony DVP-FX810 Portable DVD Player User Manual


 
Using with Batteries (continued)
Charging the Battery PackCharging the Battery Pack
1. Attach the battery pack.
2. Connect the AC adaptor, and then plug it into an AC outlet.
Player (Main Body)Player (Main Body)
Battery PackBattery Pack
Charge IndicatorCharge Indicator
3. When charging begins, the indicator light turns on.
4. When charging ends, the indicator light turns off.
5. After charging is finished, remove the AC adaptor and
disconnect the electrical cord from the outlet.
Checking the Battery Reserve LevelChecking the Battery Reserve Level
Recharge
Charging Time and Playing TimeCharging Time and Playing Time
Recharging (Power Off)
With player
Approx.
5 hours and 30 minutes
For the following conditions, the longest incidence of
continuous playback is at normal temperature (20°C).
Battery condition may reduce operating time.
-Headphone Use
-Set Backlight Adjustment to the Minimum
Playing Time (DVD- )
On
Approx.
6 hours*
VIDEO
LCD
Notes:
When the player is stopped, the battery mark is displayed
on the LCD screen. When [ ] is displayed or the
charge indicator flashes, please recharge the battery.
It is recommended to charge up to the maximum when the
surrounding temperature is in the 10-30°C range.
The battery has a limited span of use. With constant use
and the passage of time, the battery's capacity will
gradually diminish. If the playing time of the battery
shortens considerably, please understand that it has
passed its span of usage and purchase a new one.
The battery mark is not displayed on the LCD screen
when the AC adaptor or input line is being used.
Charging times may differ from that indicated above due
to conditions of use, environment, and other factors.
Full
The battery mark is not displayed when a DVD or JPEG
files are being played. Stop the player and check the
battery reserve level.
*
AC Adaptor Input Jack
[DC IN 9.5V]
AC Adaptor Input Jack
I[DC N 9.5V]
Low
22