Filter
Top Products
22
Repeat play
1 Press and hold the multi way encoder.
2 Rotate the multi way encoder to select
“Repeat,” then press it.
3 Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
4 Press (BACK).
The setting is complete and the display
returns to normal reception/play mode.
(with the card remote commander)
1 During playback, press (1) (REP)
repeatedly until the desired setting
appears.
After 3 seconds, the setting is complete.
To return to normal play mode, select “Repeat
off.”
Shuffle play
1 During playback, press and hold
(ZAP/SHUF).
2 Press (ZAP/SH UF) repeatedly until the
desired setting appears.
(with the card remote commander)
1 During playback, press (2) (SHUF)
repeatedly until the desired setting
appears.
After 3 seconds, the setting is complete.
To return to normal play mode, select “off. ”
Note
Playing tracks on shuffle play is selected from a
current USB device.
Enjoying music according to
your mood — SensMe™
Sony’s unique “SensMe™ channels” features
automatically group tracks by channel, and allow
you to enjoy music intuitively.
Before using the SensMe™
function
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
1Installing “SensMe™ Setup” and
“Content Transfer” in your computer
First install “SensMe™ Setup” and “Content
Transfer” from the supplied CD-ROM.
2Registering a USB device using
“SensMe™ Setup”
Connect a USB device to your computer, and
perform registration using “SensMe™ Setup”
to enable the SensMe™ function on this unit.
Tip
Registration can be performed either along with the
installation procedure or after installation.
Select To play
Repeat Track track repeatedly.
Repeat Album album repeatedly.
Repeat Artist artist repeatedly.
Select To play
Shuffle Album album in random order.
Shuffle Artist artist in random order.
Shuffle Device device in random order.
Content
Transfer
SensMe
™
Setup
SensMe
™
Setup