Filter
Top Products
34
Selecting a phonebook
Before making a call, make sure the appropriate
phonebook has been selected: cellular phone or
this unit.
If you select “Cellular,” you can access the
phonebook in a cellular phone via this unit*.
* If the cellular phone does not support PBAP, the
phonebook in the cellular phone cannot be selected.
1 Press and hold (SOURCE/OFF) for 1 second.
2 Press and hold the multi way encoder.
3 Rotate the multi way encoder until
“PhoneBook Select” appears, then press it.
4 Rotate the multi way encoder to select
“Cellular” or “Head Unit,” then press it.
5 Press (BACK).
Receiving phonebook data from a
cellular phone
1 Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2 Press (BROWSE).
The phonebook appears.
3 Rotate the multi way encoder to select “Add
Contact,” then press it.
“Waiting…” appears.
4 Send the phonebook data by operating the
cellular phone.
“Data Receiving…” appears while receiving
the phonebook data.
“Complete” appears when the phonebook data
is stored on this unit.
Notes
• When connecting to this unit, depending on the
cellular phone, you may be asked to give this unit
permission to access the phonebook in the cellular
phone. Permission is required from the cellular
phone.
• Before receiving phonebook data, disconnect any
cellular phone or audio device.
• To cancel the transfer of phonebook data, operate
the cellular phone.
• If the power supply lead is disconnected, the stored
phonebook data will be erased.
Deleting from the phonebook in this
unit
1 Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2 Press (BROWSE).
The phonebook appears.
3 Rotate the multi way encoder to select an
initial from the initial list, then press it.
4 Rotate the multi way encoder to select a name
from the name list, then press it.
5 Rotate the multi way encoder to select “Delete
Contact” from the number list, then press it.
6 Rotate the multi way encoder to select “Yes,”
then press it.
To clear all phonebook data, select “Delete All”
in step 3. After clearing, confirm that all
phonebook data has been cleared properly.
Preset dial
Contacts (up to 6) of the phonebook in a cellular
phone can be stored in the preset dial.
1 Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2 Push the multi way encoder up/down
to select the preset number
(“Preset 1” to “Preset 6”) to store.
3 Push the multi way encoder right to
enter storing mode.
“Waiting…” appears.
4 Send the phonebook data by
operating the cellular phone.
The contact is stored in the selected preset
number.
Voice dial activation
You can activate voice dialing with a cellular
phone connected to this unit by saying the voice
tag stored on the cellular phone, then make a call.
1 Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2 Press the multi way encoder.
“Please say the name…” appears.
3 Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.