Before Calling Service Personnel
(continued)
66
Symptom
The LCD is dark.
No response when
buttons are
pressed.
The remote con-
trol does not
work properly.
Cause
•
Check that Brightness control is set to “–”.
• Some discs prohibit certain operations.
• Hold switch is set to HOLD position.
• The remote control is too far from the
DVD player.
• There is an obstacle in the path of the
remote control and the DVD player.
• The batteries in the remote control are
exhausted
Correction
• Adjust the brightness.
•“ ”may appear on the screen during
operation.
• Release the hold mode.
• Operate the remote control within about
23 ft (7 m).
• Remove the obstacle.
• Replace the batteries with new ones.