Sony DPS5032N Portable DVD Player User Manual


 
Before Calling Service Personnel
(continued)
Reference
65
Symptom
No sound.
The playback
picture is poor.
The DVD player does
not start playback.
Cause
The equipment connected with the audio
cable is not set to receive DVD signal
output.
The audio cables are not connected
securely.
The power of the equipment connected
with the audio cable is turned off.
The Digital Audio Output is set to the
wrong position.
The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
A menu is on the LCD screen.
The Rating level is set.
Correction
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
Connect the audio cable into the jacks
securely.
Turn on the equipment connected with
the audio cable.
Set the Digital Audio Output to the
correct position, then turn on the DVD
player again.
Clean the disc.
Insert a disc. (Check that the disc
indicator in the display window is lit.)
Insert a playable disc. (Check the disc
type, color system and Regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correct-
ly inside the guide.
Press the SET UP button to turn off
the menu screen.
Cancel the Rating function or change
the rating level.