Filter
Top Products
Basic Operations
Basic Operations
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
11
3 Start recording.
To record, press r on deck B ((
is depressed automatically).
For high speed dubbing, after
depressing HI-SPEED DUBBING,
press r on deck B (( is
depressed automatically). (CFD-
ZW200 only).
Deck B
To Press
Stop recording p6 on deck B
Pause recording P on deck B
Press the button again to
resume recording.
Turn on/off the player POWER
Use these buttons for additional operations
Note
When recording a CD,
press r after the total
track number and the
total playing number of
the CD have been
displayed.
Tips
• Adjusting the volume or
the audio emphasis (see
page 23) will not affect
the recording level.
• If the AM program
makes a whistling
sound after you've
pressed r in step 3, set
the FM MODE/ISS
(Interference Suppress
Switch) at the rear to the
position that most
decreases the noise.
• For the best results, use
the AC power as a
power source and use
TYPE I(normal) tape for
recording.
• To erase a recording,
proceed as follows:
1 Press TAPE until
“TAPE” appears in
the display window.
2 Press r on deck B.
POWER p6 P