Filter
Top Products
7
Card remote commander RM-X200
Replacing the lithium battery
When the battery becomes weak, the range of
the card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery.
Notes on lithium battery
•Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a
good contact.
•Be sure to observe the correct polarity when
installing the battery.
•Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
The corresponding buttons of the card
remote commander control the same
functions as those on this unit.
1 PBC ON/OFF button 14
2 MENU button
3 SOURCE button
4 SEEK/AMS (cursor </,) buttons
5 SOUND button
6 DSPL button
7 ATT button 22
8 D-BASS button
9 OFF button
0 RTN button 14
qa PRST (cursor M/m) buttons
qs SELECT/ENTER button
qd OSD button 23
qf MODE button
qg VOL buttons
PBC
SEEK SEEK
SELECT
MENU RTN
SOUND
ENTER
PRST
PRST
SOURCE
D-BASS
DSPL OSD MODE
VOLATT
OFFON/OFF
x
+ side up
Note
A unit turned off by pressing (OFF) for two
seconds cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed or a disc is inserted to activate the unit
first.