Filter
Top Products
23
Using the On-Screen
Display
You can check the operating status of the
player and the information about the disc
using the on-screen display on the TV.
Press (OSD) on the card remote
commander.
The on-screen display will appear on the
TV.
Notes
• When you select tuner as the source, the on-
screen display will not appear.
• The initial setting of the on-screen display
changes depending on the selected source.
When the CD is played back: on
When the Video CD/Super VCD is played back:
off
Switching the language for the
on-screen display
1 During playback, press (MENU).
2 Press either side of (PRST) repeatedly
until “ENGLISH” appears.
3 Press the (+) side of (SEEK/AMS) to select
the language.
Each time you press the (+) side of
(SEEK/AMS), the language changes as
follows:
ENGLISH y CHINESE
4 Press (ENTER).
Display information of the
on-screen display
Elapsed playing timeTrack numberDisc type
Note
The display information will differ, depending on
the operation or settings.
3 Press the (+) side of (SEEK/AMS) to select
the desired setting (Example: “ON” or
“OFF”).
4 Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Boosting the bass sound
— D-bass
You can enjoy a clear and powerful bass
sound.
The D-bass function boosts the low and high
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS button.
Adjusting the bass curve
Press (D-BASS) repeatedly until the
desired bass level (1, 2, or 3) appears in
the display.
To cancel, select “D.BASS-OFF.”
Note
If the bass sound becomes distorted, select a less
effective setting of “D.BASS” or adjust the volume.
0dB
D.BASS-3
D.BASS-2
D.BASS-1
D.BASS-3
D.BASS-2
D.BASS-1
Level
Frequency (Hz)
CD TRACK TIME
1 0 . 01
REP
Play mode