Filter
Top Products
21
By pushing in and rotating the
control (the PRESET control)
Push in and rotate the control to:
Receive the stations memorised on the
number buttons.
Other operations
Tip
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for two
seconds to turn off the clock indication after
turning off the engine.
OFF
Rotate the VOL control to
adjust the volume.
Press (OFF) to
turn off the unit.
Press (ATT) to
attenuate the
sound.
Press (DSPL) to display
the band or disc type/clock.
Press (SOUND) to
adjust the sound menu.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit. (See “Changing the
sound and display settings” on page 22.)
To increase
To decrease