Filter
Top Products
Desktop Docking Station
© Directed Electronics, all rights reserved.
15
Stiletto Boombox System
Operation
Once the Boombox antenna has been installed, the power connected, and the Stiletto radio docked according to the setup
and installation instructions, power on the Boombox by pressing the Power On/Off button on the top panel. The light on the
top panel of the Boombox should light blue to indicate the power is on. If the radio does not power on at the same time,
press the Power On/Off button on the upper left side of radio.
You should hear the SIRIUS audio after the Stiletto completes its power up cycle. If you do not, adjust the volume of the
Boombox by pressing the Volume Up button on the front panel.
If you want to listen to an external audio device such as a computer, MP3 player or CD player through the Boombox, do the
following:
1. Connect the output of the audio device to the AUX connection at the front of the Boombox. Press the SOURCE
button to select the AUX input.
2. Adjust the volume on the audio device to obtain satisfactory audio output from the Boombox. If the sound is
distorted, lower the volume level on the audio device.
Pressing the bass button switches between flat and bass boost.
Backlight behind the power button is red in power off mode when connected to AC power and turns blue when powered on.
All other buttons will light blue for 10 seconds and then go to sleep until a button is pressed.
If Boombox is left on with no sound for a period of over 10 minutes it will turn the power off automatically.
The Boombox will charge the docked Stiletto radio provided the AC power adapter is connected. The Stiletto will not be
charged when operating the Boombox with battery power.
NOTE:
When switching between power operation modes (AC or Battery) the Boombox and Stiletto radio should be powered off.
When installing or removing the Stiletto radio from the Boombox the Boombox and Stiletto radio should be powered off.