Starmate Replay STB2 Boombox User Guide
8
Operation
Once the Boombox has been installed according to
the preceding directions, power on the Boombox by
pressing the Power On/Off button on the front panel.
The light on the front panel of the Boombox should
light green to indicate the power is on. If the receiver
does not power on at the same time, press the
Power On/Off button on the receiver.
You should hear the SIRIUS audio. If you do not,
adjust the volume of the Boombox by pressing the
Volume Up and Volume Down buttons on the front
panel. If you still do not hear any audio, press the
AUX button.
If you want to listen to an external audio device such
as an MP3 player or CD player through the
Boombox, do the following:
1. Connect the output of the audio device to the
AUX connection at the front of the Boombox.
2. Initially set the volume level on the audio device
to mid-range.
3. Press the AUX button on the Boombox to select
the AUX input.
4. Adjust the volume on the external device to
obtain satisfactory audio output from the
Boombox. If the sound is distorted, lower the
volume level on the audio device.
If the light on the front panel should turn red while
the Boombox is powered on, this indicates that the
battery power is low. Replace the batteries.