Filter
Top Products
ENGLISH
10
SETTING THE OSD MODE
Operations
• Plug in the AC adapter.
• Turn on the TV and the receiver, and select the corre-
sponding inputs on TV and the receiver.
• Each time the SETUP button is pressed, the video output
mode is set to the composite(default) or the component.
• When the iPod is inserted into the iPod Dock, the iPod is
turned on automatically.
■
Notes:
• When inserting or removing your iPod, don't twist it. If you
do this, it can cause to damage to the dock connector.
• When using the iPod Dock, don't use the iPod Dock with
any other iPod accessories such as FM transmitters and
microphones because they may cause a malfunction.
• The iPod adapter(supplied) needs to be inserted to match
your particular iPod.
• If there is a gap between your iPod and iPod Dock, insert
the adapter into the iPod Dock, then insert your iPod.
• To control your iPod without the OSD, set the OSD mode
to Off and use the remote control.
■
Note:
• Before using this iPod Dock, first set the OSD mode.
1. Insert your iPod into the iPod Dock.
2. Press the SETUP button to set the video output
mode depending on the video connection.
• On : Playlists (artists, albums, songs and so on) are dis
played on TV and you can navigate and select
music or video while watching TV. When this mode
is selected, iPod displays the Sherwood logo.
• Off : Nothing is displayed on TV and you navigate and
select contents by using iPod's display.
3. Press the MODE button to set the OSD mode.
Controlling your iPod without the OSD
• To control your iPod with the OSD, when iPod is inserted
in the iPod Dock and the OSD mode is set to On, you can
navigate and select your music or video on the TV.
Controlling your iPod with the OSD
DS-10(A)_ENG_090212:DS-10(A)2009-02-19오 10:43페이지10