Filter
Top Products
18
Part names
Front view
RESET*
POWER button
INPUT 3 terminal (S-VIDEO)
INPUT 3 terminal (VIDEO)
SYSTEM RESET**
INPUT 3 terminals (AUDIO L/R)
AVC System
Rear view
Antenna (A)
input terminal
Antenna (B)
input terminal
Antenna (A)
output terminal
How to open the door.
STANDBY/ON indicator
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press RESET, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to STANDARD
• TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• Dolby virtual resets to Off
• Image position initializes
** The product may not function when receiving strong noise (e.g. excessive static electricity, power surge or
abnormal voltage due to lightning) or if operations are performed incorrectly. In such case, press SYSTEM
RESET and try operating again.
NOTE
• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset or secret number. See page XX for clearing the secret number when you
know it. See page XX for initializing to the factory preset values when you forget your secret number.
Headphone
(When connecting headphones, the sound from the speakers is muted.)
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near future.)
EXTERNAL SPEAKER terminals
PC CARD slot
CARD indicator
INPUT 1 COMPONENT
video terminals (Y, P
B, PR)
INPUT 2 COMPONENT
video terminals (Y, P
B, PR)
MONITOR OUTPUT terminal (S-VIDEO)
DISPLAY OUTPUT 1 terminal
DISPLAY
OUTPUT 2
terminal
AC INPUT
terminal
RS-232C
terminal
MONITOR OUTPUT terminals (AUDIO L/R)
INPUT 2 terminal (VIDEO)
INPUT 2 terminals (AUDIO L/R)
INPUT 1 terminal
(VIDEO)
INPUT 1 terminals (AUDIO L/R)
MONITOR OUTPUT terminal (VIDEO)
DISPLAY OUTPUT 3 terminal
Input 5 terminal
(AUDIO)
INPUT 5 terminal (DVI-I)
INPUT 4
terminal
(HDMI)
CENTER CHANNEL INPUT