13
Disc handling and product maintenance
Handling precautions
Hold the disc by the edges so the surface will not be soiled with fingerprints.
Fingerprints, dirt and scratches can cause skipping and distortion.
Do not write on the label side with a ball-point pen or other writing utensils.
Do not use record cleaning sprays, benzine, thinner or static electricity prevention liquids.
Be careful not to drop or bend the disc.
Do not install more than 1 disc on the disc tray.
Do not close the disc tray when the disc is not installed properly.
Be sure to store the disc in its exclusive case when not in use.
If the disc surface is soiled
Wipe gently with a soft, damp (water only) cloth.
When cleaning the disc, wipe in straight lines from the center of the disc to the edge.
(If you wipe the discs using a circular motion, circular scratches are likely to occur, which will cause noise.)
If the disc is brought from a cold to a warm environment, moisture may form on the disc
Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in the following places:
Areas exposed to direct sunlight
Humid or dusty areas
Areas directly exposed to a heat outlet or heating appliance
Product Maintenance
Be sure to turn the player off and disconnect the AC power cord before cleaning the player.
Wipe the player and LCD screen with a dry, soft cloth.
If necessary wipe clean with a cloth slightly dampened with a mild soap-and-water solution.
Then wipe again with a dry cloth.
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust.
TM
MACROVISION Information
This DVD/VCD/CD player is protected by MACROVISION and no unauthorized copy can be made by VIDEO CASSETTE RECORDER.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
When storing or carrying the product, keep sharp and magnetized objects away from the cabinet and LCD screen.