Filter
Top Products
10
1.SYSTEM SETUP
Initial DVD settings
2. LANGUAGE SETUP
1.1 TV SYSTEM - It is used to select the TV mode.
Options: NTSC / PAL/ AUTO
Please select this option as per your area or TV set.
1.2 SCREEN SAVER - When the player is not in use for 3
minutes, a running DVD logo will move across the TV
screen to protect an external screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.3 TV TYPE- It is used to select the TV scan mode,
please set as per your TV set, if an external TV is
connected.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD - Input password to unlock the system.
The steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item
by scrolling the down navigation button, and then press
the right navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press SELECT button to confirm. When the password
is changed, you are needed to input the new one to
unlock the system.
1.4.3 If you forget your own password, enter "8200" to
unlock it.
NOTE: If wrong password was input in unlock status, the
system will lock.
1.5 RATING - Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options: 1 KID SAFE/2 G/ 3 PG/ 4 PG 13/ 5 PG-R/ 6R/7
NC-17/ 8 ADULT
1.6 DEFAULT - Reset to factory settings.
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.1 OSD LANGUAGE - It is used to select different On Screen
Display language for different user.
Options: ENGLISH JAPAN
(The number of these options depends on the customer's need.)
2.2 AUDIO LANG - Select preferred audio language (DVD
only, need disc software support).
Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMAN/DUTCH/JAPAN.
SPEAKER SETUPSPEAKER SETUP
DOWNMIX
EXIT SETUP
3. AUDIO SETUP
AUDIO SETUPAUDIO SETUP
AUDIO OUT
EXIT SETUP
3.1 AUDIO OUT - Set digital output code format.
Options:
SPDIF/OFF: If you are not connecting to an amplifier via
digital output, please select this option.
SPDIF/RAW: Used in general home theatre, select this can
output 5.1 channels audio.
SPDIF/PCM: Select this it can only output 2 channel, but you
will get higher quality audio output.
4. VIDEO SETUP
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
4.1 BRIGHTNESS-- to set the brightness for the display.
Options: 0/2/4/6/8/10/12
4.2 CONTRAST--to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
4.3 HUE--to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
4.4 SATURATION--to set the saturation level for display.
Options: 0/2/4/6/8/10/12
5. SPEAKER SETUP
5.1 DOWNMIX
Options: LT/RT- Left/Right mix mode
STEREO- Select this option if you don't
have a 5.1 channels amplifier.
2.3 SUBTITLE LANG- Select preferred subtitle language
(DVD only, need disc software support).
Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMAN/DUTCH/JAPAN.
2.4 MENU LANG - Select preferred disc menu language
(DVD only, need disc software support).
Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/
FRENCH/GERMAN/DUTCH/JAPAN.
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV TYPE
SCREEN SAVER