Sangean Electronics PR-D2/V Clock Radio User Manual


 
Sleep function
The sleep timer will automatically switch off the radio after a preset
time has elapsed.
1. Press and continue to hold down the Power button for more
than 2 seconds, followed by 2 beep tones, the display will cycle
through the available sleep times in the order 90-60-30-15-90.
Release the Power button when the required sleep time
appears in the display. The symbol will appear in the display
and the radio will play the last station selected.
2. To cancel the sleep function, press the Power button, the
symbol will disappear and the display will revert to showing
real time.
Display backlight
When the radio is powered via the mains, the display backlight will
be remain illuminated while pressing the Light button unless
turned off by pressing the Light button.
When your radio is powered by batteries pressing the Light button
will turn on the display backlight and illuminate the display for
approximately 15 seconds. The display backlight may be turned off
immediately by pressing the Light button.
The display backlight will remain illuminated after pressing the
Light button if you continue operating the radio. The display
backlight will be turned off automatically after 15 seconds of your
last operation to the radio.
10
GB