Filter
Top Products
Troubleshooting
99
Overview Getting Ready Recording Playback File Operation Computer Appendix
Problem Cause Page
No sound received
from plug-in mic
In order for sound to be received from a plug-in mic, plug-in power must be
turned on. Turn on plug-in power.
p. 41
Cannot select MP3 as
recording format
MP3 recordings are possible only when 2 CHANNEL is selected as the
recording mode, and the sampling rate is set at 44.1 kHz or 48.0 kHz.
p. 33
Problems with Playback
Problem Cause Page
No sound
You might not hear the sound if the output volume is too low. Try gradually
increasing the output volume.
p. 61
Make sure that your headphones or speakers are correctly connected. p. 29
Can’t play back
Make sure that the le name is assigned correctly. The R-26 cannot use les
that have a name that begins with a “.” (period).
p. 72
The R-26 can only play les with a le name extension of .MP3 or WAV. p. 66
A damaged le cannot be played. You might be able to recover the le by
using the Repair function.
p. 77
When using the unit as an audio interface, you won’t be able to play projects
that have a dierent sampling frequency than the sampling frequency that is
set for the audio interface.
p. 86
Unintended les are
played
The le Play Mode might be set to shue playback (SHUFFLE). If so, the
R-26 will randomly select and play the next le. Change the setting back to
conventional playback (SEQUENTIAL).
p. 61
No sound heard with
preview monitor
Sound won’t be output while headphones are being used. p. 29
Could preview monitor be turned o in the SYSTEM SETUP?
Turn preview monitor on.
p. 94
When the input device is set as the internal mics in Audio Interface Mode,
sound will not be output.
p. 89