Filter
Top Products
Recording
35
Overview Getting Ready Recording Playback File Operation Computer Appendix
Using the AUTO START
Function
By using the AUTO START function, you can
have recording start automatically when
a specied time has elapsed, or when the
recording level exceeds a specied value.
1. Choose [MENU]Ú<REC SETUP>Ú
<AUTO START>.
“AUTO START” is located on page 2/3. Touch
to access 2/3.
2. Touch the time after which you want
recording to start, or the input level
at which you want recording to start
automatically.
Setting Description
OFF AUTO START is not used
2 sec
Time until recording
starts
5 sec
10 sec
Level 1 (-60 dB)
Level at which recording
starts
Level 2 (-30 dB)
Level 3 (-20 dB)
3. Touch <BACK> to return to the menu
screen (p. 18).
Setting the File Type
If the recording format is set to WAV 16-BIT
or WAV 24-BIT, you can choose whether to
use BWF format, which embeds information
about the recording time and the recording
device (Roland R-26) into the WAV le. BWF
format les can be used by audio editing
software that supports BWF.
* BWF setting is eective only if the
recording format is set to WAV 16-BIT or
WAV 24-BIT. On your computer, the le
will have a le name extension of “.WAV,”
just like a conventional WAV le.
1. Choose [MENU]Ú<REC SETUP>Ú
<FILE TYPE>.
“FILE TYPE” is located on page 3/3. Touch
to access 3/3.
2. Touch the desired le type.
Setting
WAV
BWF
3. Touch <BACK> to return to the menu
screen (p. 18).