Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold the Menu button
so that the display shows "Set
Brightness" on the lower line of the text display.
2. Press and release the Tuning Up or Down buttons until the display
shows "System reset".
3. Press and release the Select button. The display will show "Press
SELECT to reset".
4. Press and release the Select button again to confirm the reset
operation.
5. After a system reset, all radio station presets will be set to empty.
Alarms will be cancelled, audio equaliser, display brightness and
touch panel settings will have been set to their default values. The
clock will be reset and the unit will behave as when first switched on
(see page 9).
In case of malfunction due to electrostatic discharge, reset the product
using the above procedure. In some circumstances it may be necessary
to disconnect and then reconnect the mains power in order to resume
normal operation.
If a problem persists our technical staff would be pleased to help offer
any assistance on operating the radio. Our technical helpline number
is 020 8758 0338.
1
3,4
2
2
Audio and Setup .
45