20
Manual tuning - FM
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Radio button to select the FM band and fully
extend the Telescopic aerial for optimal FM reception.
3. Press the Tuning Up
or Down buttons to tune to a station. The
frequency will change in steps of 50kHz. Pressing and holding one
of the buttons will advance the frequency selection several times each
second.
4. When the end of the waveband is reached the radio will recommence
tuning from the opposite end.
5. Set the Volume to the desired setting.
6. To switch off your sound system press the
On / Standby button.
FM
1,6
2
5
5
3
3
FM stereo / mono
1. If an FM station is received with a weak signal some hiss may be
audible. To reduce the hiss press and release the Select button so
that the Stereo indicator on the display is cancelled. Your radio will
switch to mono mode.
2. To return to stereo mode press and release the Select
button so that Stereo indicator on the display is visible. The radio
will switch to stereo mode.
1,2