Roberts Radio MP-SOUND 43 MP3 Docking Station User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
31
iPod Docking .
iPod docking
Your MP-43 sound system has an iPod dock facility which allows you to
play digital audio files and video soundtracks held on your iPod directly.
The MP-43 uses the Universal Dock Connector developed for use with
iPods. Recent models of iPod are supplied with adaptor inserts which
ensure correct alignment of the iPod with the electrical connector. Earlier
models of iPod were not supplied with the necessary inserts, and so
your MP-43 is supplied with insert types 1 - 7. Should you require a
later insert to use your iPod with the MP-43, then please contact an iPod
accessories supplier.
1. Ensure that the sound system is in standby. Carefully remove the iPod
dock connector cover from the top of your sound system.
2. Place the iPod docking adaptor (types 1 - 7 supplied with the MP-43)
into the iPod docking recess so that it is securely seated.
3. Carefully place your iPod on the universal iPod dock connector then
press the On / Standby button to switch on the sound system. To
avoid possible damage to either device, not use your iPod without
the correct adaptor fitted in the dock connector.
4. To select the iPod mode press the Media button until "iPod" shows
on the display. If it was previously playing, your iPod will switch on
and continue playing from where it was previously stopped.
Note: The MP-43 sound system is able to recharge your iPod's internal
battery. Recharging does not
take place while your MP-43 is using DAB
or FM radio.
Your iPod will use its backlight settings as configured. If these need
changing, use the iPod's Settings menu.
3
4
Docking recess
iPod dock connector
2,3