Filter
Top Products
23
iPod
®
and iPhone
®
docking
Your clock radio has an iPod dock facility which allows you to play digital
audio fi les and video soundtracks held on your iPod or iPhone using the
clock radio's loudspeakers.
Your clock radio uses the iPod Universal Dock connector developed for
use with most iPods. Some models of iPod are supplied with Universal
Dock Adapter inserts which ensure correct alignment of the iPod with the
electrical connector. Should you require an insert to use your iPod with
your clock radio, then please contact an iPod accessories supplier.
Important: To avoid possible damage to your iPod or iPhone, do not
use your iPod or iPhone with the product without the correct adapter
fi tted to the clock radio.
Throughout this section of this book, iPod means iPod or iPhone.
Docking your iPod or iPhone
1. Ensure that the clock radio is in standby.
2. Place the iPod docking Adapter (see above) into the iPod docking
recess so that it is securely seated.
3. Carefully place your iPod onto the Universal Dock connector.
4. Press the On / Off control to switch on your clock radio.
5. To select the iPod mode press the Mode button until 'iPod' shows on
the display. If it was previously playing, your iPod will switch on and
continue playing from where it was previously stopped.
Note: Your clock radio is able to recharge your iPod's internal battery. Your
iPod will use its backlight settings as confi gured. If these need changing,
use the Settings menu on your iPod.
4
5
Docking recessDock connector for iPod and iPhone