Filter
Top Products
Setting the Clock Automatically
The clock time and day of week can be set automatically when recieving
an RDS radio station that transmits clock time (CT). The CT information
is transmitted once every minute. If the signal has sufficient signal
strength the clock will set within one to two minutes.
1. Switch on the radio with the BAND button on the CD clock radio
or the BAND button on the remote control.
2. Select an RDS station using the Tuning Up/Down buttons.
3. "CT" will flash in the LCD display indicating that the radio is waiting
for an RDS time signal. The "CT" indicator will stop flashing when the
time is set.
Note:- If the clock does not set within three to four minutes, the radio
station may not be transmitting clock time (CT) information, in this case
try another radio station.
The clock time and day of week are updated every time the radio is
switched on and whilst listening to an RDS station transmitting clock time
(CT) information.
Auto setup can take up to 5 minutes to complete and is dependent on the
signal strength and number of stations in your area.
Should Auto setup fail, setting the clock and pre-setting stations can be
carried out manually as described in the following sections.
9
1
2
1
Remote Control