Filter
Top Products
EN - 5
4. Push the disc tray back in.
The total number of tracks on the disc can be read
from display.
Play and pause
1. In stop mode, press to begin CD playback.
2. During CD playback, press
to pause playback.
Press again to resume.
Skip and search
1. Press / to skip to the previous or next track
respectively.
2. Press and hold / to search quickly current
track backward or forward respectively.
Stop playback
Press to stop playback.
Play mode
Press BAND / MODE to select among playback mode
(repeat current track / repeat all / random). Selection
made is indicated by icons on display.
Programming
1. In stop mode, press PROG / MEM to enter program
setting mode.
The program location shows, meanwhile the track
number “ ” and MEMORY icon flash on the
display.
2. Press / to select the track you want to
program.
3. Press PROG / MEM again to confirm your selection
and access the next program location.
4. Repeat steps 2 to 3 to program to a maximum of 20
tracks.
5. Press in program mode to start program
playback (MEMORY indicator lights on the display).
• Press to return to stop mode.
Displaying program list
In stop mode, press PROG / MEM repeatedly to show
program list.
Exit program playback mode
In program playback mode, program mode will
be deactivated and memory icon will turn off after
playback of all programmed tracks.
Clearing program list
Your program list will be erased once you press to
stop program playback and press again. Program list
will also be erased if you open the disc compartment
door, change to another source mode (e.g. radio) or
power off the unit.
Tape Player
Playing a tape
1. When the unit is on, press SOURCE until TAPE
mode is selected. The tape indicator “ ” lights
on the display.
2. Press STOP / EJECT to open the tape deck
door.
3. Insert a tape into the
door and push the
door closed.
4. Press REW or FWD to wind the tape
to the desired starting position. Press STOP /
EJECT to stop winding.
5. Press PLAY to start playback.
• Press PAUSE to pause playback (press again to
release the button to resume playback).
• Press STOP / EJECT to stop playback.
NOTE:
• Be sure to slide the cassette into the tape slot on
the door. Do not place the tape directly onto the
tape mechanism.
• For better recording quality, use normal bias tape
(Type I) only.
Recording to tape
From radio
1. Insert a tape into the deck.
2. Press SOURCE until RADIO mode is selected.
3. Press BAND / MODE to access the desired radio
band.
4. Press / to tune to the station to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Press PAUSE or STOP to pause or stop the
recording respectively.
From CD
1. Insert a tape into the deck.
2. Press SOURCE until CD mode is selected.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Play the track or program to be recorded.
7. Press PAUSE
or STOP to pause or stop the
recording respectively.
From auxiliary input
1. Insert a tape into the deck.
2. Press SOURCE until the indicator “ ” lights on
the display.
3. Start playback from the auxiliary device.
4. Press REC
and PLAY together to begin
recording.
5. Press PAUSE or STOP to pause or stop the
recording respectively.
811-317591W012 EN & FR & ES IB OK Kelly.indd 5811-317591W012 EN & FR & ES IB OK Kelly.indd 5 9/16/2010 4:58:18 PM9/16/2010 4:58:18 PM