Filter
Top Products
-
8
-
PARAM ET ER SETT ING INST RUCT ION
NOTE :
1.
BK/START_T : The period time before starting music
2.
BK/STOP_T : The period time before stopping music
3. PS/BPM_SYNC: Add the PHASER effect to the music in a cycle
based upon the selected beat
4.
PS/GAIN: Determine the volume of PHASER effect signal. The
higher ratio with stronger effect.
5.
PS/TIME: Determine the length of PHASER effect. SYNC-OFF,
0.25 sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4
beat is the shortest and 64 beats is the longest.
6.
FG/BPM_SYNC: Add the FLANGER effect to the music in a
cycle based upon the selected beat
7.
FG/GAIN: Determine the volume of FLANGER effect signal. The
higher ratio with stronger effect.
8.
FG/TIME : Determine the length of FLANGER effect. SYNC-OFF,
0.25 sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4
beat is the shortest and 64/1 beats is the longest.
9.
EC/BPM_SYNC: Add the ECHO effect to the music in a cycle
based upon the selected beat
10.
EC/GAIN: Determine the volume of ECHO effect signal. The
higher ratio with stronger effect.
11.
EC/DELAY_LG: The delay time of ECHO effect. SYNC OFF,
0.01 sec is the shortest, and 4 sec is longest; SYNC_ON, 1 beat
is the shortest and 4/1 beats is the longest.
12.
FL/BPM-SYNC: Add the FILTER effect to the music in a cycle
based upon the selected beat
13.
FL/SCAN_TIME (FL/BPM-SYNC:ON): Determine the scanning
time of FILTER effect. 1/4 beat is the shortest and 64/1 beats is
the longest
14.
FL/FREQUENCY(FL/BPM-SYNC:OFF) : Select the band of
frequency. The number increased, The frequency is close to the
treble. The number decrease, The frequency is close to bass.
15.
FL/GAIN: Determine the volume of FILTER effect signal. The
higher ratio with stronger effect.
16.
PAN/BPM_SYNC: Add the PAN effect to the music in a cycle
based upon the selected beat
17.
PAN/MIX : Determine the volume of signal taken for mixing to the
other side.
18.
PAN/PERIOD: Determine the period of PAN effect. SYNC-OFF,
0.06 sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64
beat is the shortest and 4/1 beats is the longest.
19.
CP/BPM_SYNC: Add the CHOP effect to the music in a cycle
based upon the selected beat
20.
CP/WIDTH : Determine the ratio of auditable music, the higher
ratio with more audible signal.
21. CP/PERIOD : Determine the period of CHOP effect. SYNC-OFF,
0.06 sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64
beat is the shortest and 4/1 beats is the longest.
22.
SPL/MIX_VOL: The ratio of SAMPLE single mixing into the
music.
23. SPL/PITCH: To select the sample pitch range from –100% to
+100%, 0% means sample playback speed is
unchanged.
24.
SPL/LOOP_SW: To play the sample music repeatedly
25. SPL/REVERSE: To play the sample music backward to mix with
music.
26.
SPL/INSERT : To cut off the music and insert the sample music.
27.
KEY_SEMITONE : SEMITONE_ON, to change the key by half
step, from +12 to –24 key; SEMITONE_OFF, change the key by
percentage from –100% to +100%.