Filter
Top Products
-
3
-
IMPORTANT SAFETY INSTRUCTION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding
prong. The third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
DESCRIPTION OF THE FUNCTIONS
Function of the Main Unit :
1.POWER (Power Switch)
Press the power switch to turn the unit on, and the LED
indicator will be light. To switch the POWER off by pressing
the POWER switch again.
2.DISC SLOT
Insert and remove the disc.
3.EJECT BUT TON
Press to eject the disc.
NOTE: Disc won’t be ejected unless stop or pause button
has been push first.
4.DISC INDICATOR
It lights up after loading the disc.
5.AC INPUT
Connecting this power cord into an AC wall outlet with the
proper AC voltage.
6.LINE OUT (Output Jacks)
The audio from each CD player is output from these jacks.
Connect to the line input of the mixer.
7.CONNECTOR PORTS
The 8-pin termination permits the connection of the main unit
to the control unit 1.
8.CONNECTOR PORTS
The 6-pin termination permits the connection of the main
unit to the control unit 2.
9.DIGITAL OUT
The digital from each CD player is output from these jacks.
Connect to the line input of the D/A Amplifier.
10.START/PAUSE
This connector is used for fader start; connect it to a mixer,
and remote control the “START/PAUSE” by moving the fader
of mixer.
11.TACT -LOCK option
Select the type of switch in the mixer for FADERSTART wire
remote control.
12.MEMORY CARD SLOT (OPTION)
Load SD card for playback or copy MP3 audio file from
computer through USB cable.
Insert Card: Press the card to the slot gently. On the
display, the mark above CARD lights up.
Remove Card: Draw out the card, the mark above
CARD is off.
Loading MP3 file: During writing data to the card, the
display will show ”PC LINK”, and all function keys are
locked, only the EJECT key is workable.
13.USB PORT (OPTION)
Connect to a computer’s USB connector with USB cable.
USB Driver disc is attached for installing the driver program, it’s
designed to work with Microsoft Windows 98/Me/2000/XP.
Function of the Control Unit
230V
50Hz
115V
60Hz