Filter
Top Products
-
4
-
40
1. UNIT 1-CONTROL OPERATION PANEL
This operation panel remotely controls the main unit 1.
2. UNIT 2- CONTROL OPERATION PANEL
This operation panel remotely controls the main unit 2.
3. EJECT BUTTON
Press to eject the disc.
Note: Disc can’t be ejected unless the stop or pause
button has been pushed first.
4. MATRIX L.C.D
Display the details of music data, please refer to the LCD
instruction (page 6)
5. CONT./SINGLE BUTTON ( OUTRO)
To press this button it can switch between auto cue
single and continue. The selected mode is indicated on
the display.
*AUTO CUE SINGLE - After each track, the unit pauses
at the beginning of next track. The playback starts from
audible point.
*CONTINUE -To play all tracks continually.
*OUTRO - The unit will play the last 30 seconds of each
track. Press the button for 3 seconds to switch OUTRO
function.
Note: OUTRO is not available for MP3 music.
6. TIME / STOP BUTTON
This button switches the time display between total
remaining time, each remaining time and elapsed
playing time. The unit will be in the “stop” mode if you
continue pressing the button for 3 seconds.
7. SEARCH BUTTON
Pressed the button to switch the function of Jog Dial
between SEARCH and PITCH BEND.
When the indicator LED is light, dial the jog for quick
search forward and backward.
When the indicator LED is off, dial the jog for pitch
bend function.
If the jog is unmoved for 8 seconds, the indicator is off,
and the jog is for pitch bend function.
8. TRACK BUTTON
These buttons select the track to be played.
9. +10 BUTT ON
Pressed the button to forward 10 tracks. If you forward 10
tracks, and the tracks over total tracks, the unit will jump to
track 1...
10. PLAY/ PAUSE BUTTON
Each press of this button causes the operation to change
between PLA Y and PAUSE modes.
11. CUE BUTTON
The cue function allows the CD returning to the memorized
point. In PAUSE mode, pressing the CUE button to set the cue
point, and the CUE button blinks; in PLAY mode, press this
button to pause the unit at the memorized point.
12. BOP BUTT ON
The playback will automatically play from the CUE point upon
the button is pressed.
13. PITCH BUTTON
Select the pitch change range from ±8%, ±16%, ±32%,
±100%. The playback speed will change when you move the
pitch control slider.
14. PITCH CONTROL SLIDER
To match the choices of playback speed (8%, 16%, 32%,
100%), you can choose what range you want between
minimum (up side) and maximum (bottom side) by moving the
pitch control slider.
15. PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend
function allows the position of the bass beat to be matched
after the pitch has been adjusted. The pitch will automatically
rise up to + 16% from the current setting while pressing the “ +
“button. While pressing the “ – “ button, the pitch will
automatically drop to - 16 % from current setting. By the way of
changing the pitch the position of the beats can be matched.