Filter
Top Products
17
<DRB1349>
FADER OPERATIONS
Lag Lag
»
BANK 3
FX ADJ. FX ADJ.
BANK
EDIT
BAN
K
EDIT
FADER
CURVE
FADER
CURVE
BANK 2
BANK 1
BANK 1
BANK
2
BANK 3
FADER CURVE
NOR
M
AL
NOR
M
AL
NOR
M
AL
32 32
1616
FADER CUT LAG : 1 .0
mm
CF 1
CH 1 CH 2
CF 2
±
Cross fader cut lag dimension
display
Press FADER
CURVE/BANK
EDIT button.
REVERSE
FEELING
ADJ.
21
Fader reverse function
The operating directions of the CH-1, CH-2 and cross fader
levers can be reversed by setting the front panel’s FADER
REVERSE switches to their [ON] positions.
When the CH-1 (or CH-2) FADER REVERSE switch is set to
[ON], the top panel CH-1 (or CH-2) REVERSE indicator lights,
and the corresponding lever’s operating direction is reversed
(scale mark “0” becomes attenuation 0 dB, while scale mark
“10” becomes minus infinity). The fader start function also
operates in reverse.
When the C.F. FADER REVERSE switch is set to [ON], the
top panel’s cross fader REVERSE indicator lights, and the
lever operating direction is reversed (left side becomes CH-2
and right side becomes CH-1). The fader start function also
operates in reverse.
Cross fader lag adjustment
The mechanical play (the lag or range of movement in which
no functional effect takes place) at the two extreme ends of
the top panel cross fader lever movement can be adjusted by
using the front panel’s FADER CUT LAG dial, within a range
of 1-6 mm.
FADER CURVE
CROSS
S
FADER 1
MAXMIN
FADER CUT LAG
REVERSE
FEELING
ADJ.
21
Fader attenuation curve adjustment
The front panel’s FADER CURVE dials can be used to adjust
the attenuation curve response of the cross fader and
channel fader. The cross fader can be adjusted independently
for CH-1 and CH-2 sides. By pressing the top panel’s FADER
CURVE/BANK EDIT button, the adjustment status can be
displayed on the touch panel.
7 Channel fader curve adjustment (CH-1, CH-2)
CH-1 C.F. CH-2
FADER REVERSE
OFF
ON
OFF
ON
OFF
ON
Fader Start Function
When the CH-1 and CH-2 jacks of this unit are connected to a
separately sold Pioneer DJ CD player (models CDJ-1000,
CDJ-1000MK2, CDJ-800, CDJ-100S, CDJ-700S, CDJ-500II,
CMX-3000, CMX-5000 or DMP-555), the channel fader and
cross fader functions can be used to automatically start
playback of the connected CD player (the applicable control
cord must be connected). By moving the mixer’s channel
fader or cross fader lever, the CD player’s pause function is
released and play starts instantly. Also, by returning the fader
lever to its original position, the CD player can be returned to
its cue point (back cue function), thus allowing sampling
playback.
PHONES
FOOT SW
PROFESSIONAL 2CHANNEL MIXER
DJM-909
CH-1
CH-2
OFF
CH-1 C.F. CH-2
FADER REVERSE
OFF
ON
OFF
ON
OFF
ON
FADER CURVE
CROSS FADER 2CROSS FADER 1 CH-2CH-1
MAXMIN
FADER CUT LAG
FADER START
C.F. 1 CH-1 C.F. 2 CH-2
POWER
012345678910 012345678910
012345678910
LEVEL
LEVEL
7
Cross fader curve adjustment (CROSS FADER 1, 2)
Channel fader lever positions
Cross fader lever positions
Adjusting Fader Lever Operating Sensation
Operating load adjust screw
(FEELING ADJ.)
The supplied hexagonal Allen driver can be used to adjust the
hexagonal Allen screw located next to the top panel’s cross
fader slider opening, thus modifying the sliding resistance of
the lever. Rotate the screw clockwise to increase sliding
resistance and counterclockwise to reduce resistance.