Filter
Top Products
11
<DRB1349>
PART NAMES AND FUNCTIONS
43 CH-1 effect switch and indicator
(EFFECT LOCK ON/OFF/ON)
To turn effects [ON], either pull switch forward (switch
returns automatically to [OFF] when released) or slide to far
side to the [LOCK ON] position. When effects are [ON], the
indicator flashes and effects are applied to CH-1.
44 CH-1 TAP button
Under normal conditions, the automatic BPM counter
operates to display the track’s BPM value on the touch panel.
Automatic BPM counting may be difficult with some tracks,
however. In such cases, or if you wish to deliberately set a
different BPM, use the TAP button.
• The BPM value can be changed by rotating the TIME/
SELECT dial while holding the TAP button depressed.
• Tapping the button in time with the beat will cause the
function to switch to the manual BPM count mode; the
tapped beat will be counted and displayed as the BPM
value. Returning to the auto BPM mode is performed from
the effect parameter adjust screen (see page 16,
“Automatic Mode BPM Counting”) .
45 CH-2 effect bank buttons and indicators
(BANK 1, 2, 3)
When one of these buttons is pressed, the indicator lights
and the corresponding preset effect is enabled. Each BANK
button can be recorded with three effects for CH-2 (at time of
shipping, the buttons have been factory preset with typically
used effects). BANK 1 is selected in the default condition
after power is initially turned on.
46 CH-2 effect parameter adjust button (FX ADJ.)
Press to display the touch panel’s CH-2 effect parameter
adjust menu.
47 Fader curve display and CH-2 effect select
button (FADER CURVE/BANK EDIT)
Press to display the fader curve on the touch panel. Holding
the button depressed for about one second will cause the
touch panel to display the CH-2 effect select menu.
48 CH-2 effect time adjust/select dial
(TIME/SELECT)
Use to adjust the time parameters of effects applied to CH-2
(rotate clockwise to lengthen, counterclockwise to shorten).
When the effect select menu is displayed, causes the effects
list to scroll.
49 CH-2 effect mix ratio/depth adjust dial
(MIX/DEPTH)
Use to adjust the volume (amount) of effects applied to CH-2
(rotate clockwise to increase effects, counterclockwise to
reduce).
50 CH-2 effect switch and indicator
(EFFECT LOCK ON/OFF/ON)
To turn effects [ON], either pull switch forward (switch
returns automatically to [OFF] when released) or slide to far
side to the [LOCK ON] position. When effects are [ON], the
indicator flashes and effects are applied to CH-2.
51 CH-2 TAP button
Under normal conditions, the automatic BPM counter
operates to display the track’s BPM value on the touch panel.
Automatic BPM counting may be difficult with some tracks,
however. In such cases, or if you wish to deliberately set a
different BPM, use the TAP button.
• The BPM value can be changed by rotating the TIME/SELECT
dial while holding the TAP button depressed.
• Tapping the button in time with the beat will cause the
function to switch to the manual BPM count mode; the
tapped beat will be counted and displayed as the BPM
value. Returning to the auto BPM mode is performed from
the effect parameter adjust screen (see page 16,
“Automatic Mode BPM Counting”) .