Philips SA3MXX02 MP3 Player User Manual


 
21
English
EN
11 Technical data
Power
Power supply: 150 mAh Li-ion polymer inter-
nal rechargeable battery
MP3 play time¹: up to 13 hours
Radio play time¹: up to 7 hours
Software
Philips Device Manager
Connectivity
Headphone 3.5 mm
USB 2.0 High speed
Sound
Channel separation: 40 dB
Frequency Response: 45 - 16,000 Hz
Output power: 10.0 mW
Signal to noise ratio: > 75 dB
Bit rates Sampling rates
MP3:
8 - 320 kbps in CBR
and VBR
8, 11.025, 16, 22.050,
24, 32, 44.1, 48 kHz
WMA:
10 - 320 kbps in CBR
32 - 192 kbps in VBR
8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
FLAC:
up to 1.1 Mbps 44.1 kHz
APE:
up to 1.3 Mbps 48 Khz
Audio playback
Supported formats:
Music transfer³
Drag and drop in Windows® Explorer
Storage media
Built-in memory capacity²:
SA3MXX02 2GB NAND Flash
SA3MXX04 4GB NAND Flash
SA3MXX08 8GB NAND Flash
Display
Color LCD 128 x 64 pixels
Note
¹ Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
² 1GB = 1 billion bytes; available storage
capacity is less. Full memory capacity may
not be available as some memory is reserved
for the player. Storage capacity is based on 4
minutes per song and 128 kbps MP3 encoding.
³ Transfer speed depends on operating system
and software configuration.
System requirements
Windows® XP (SP3 or above) / Vista / 7
Pentium III 800 MHz processor or higher
512 MB RAM
500 MB hard disk space
Internet connection
Windows® Internet Explorer 6.0 or later
CD-ROM drive
USB port