Filter
Top Products
9
RRuunnnniinngg mmooddee:: MMaannuuaall ccaalliibbrraattiioonn
Press and hold 22;; to power on.
From the root menu, press 44 , 22 to enter the running mode.
1
To calibrate the speed and distance monitor, select CALIBRATION > MANUAL.
2
Press 33 or 44 to select calibration offset (from 0.50 to 1.50). Change the offset value
to make small adjustments. If the monitor is under-measuring a known distance,
increase the offset value. Different shoe models may affect the monitor’s calibration.
Adjust the offset value accordingly if you notice differences between shoes.
3
To optimize SDM performance for different running style, you can manually
calibrate the SDM.
TIP
> If you run 400m and the monitor returns a reading of 380m (5% under), you
should adjust the offset value to 1.05.
> Write down and keep your offset value. It will come in handy if your friends
borrow your MP3RUN and they change your calibration setting.
✔
*Actual display varies with use
PSA260-eng.qxd 7/8/04 2:48 PM Page 9