Filter
Top Products
23EN
Recording Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
23EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
1
Press [STANDBY-ON
y
y].
Turn the TV on. Select the input to
which the unit is connected.
2
Use [K / L] to select your desired
language, then press [OK] to set
language.
Initial Setup
OSD Language
English
Français
Español
3
Use [K / L] to select the type of
broadcasting signal, then press [OK].
Initial Setup
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Auto Presetting Now
CH 1
4
Press [OK] to activate “Clock Setting”.
Initial Setup
Clock Setting
- - - / - - / - - - - ( - - - )
- - : - - - -
5
Proceed to step 5 in “Manual Clock
Setting” on page 28.
• If a PBS (public broadcasting station) is
available in your area, follow “Auto Clock
Setting” on page 27.
E7H42UD_DVDR3506-37_EN.indd 23E7H42UD_DVDR3506-37_EN.indd 23 2007/12/28 10:52:562007/12/28 10:52:56