Filter
Top Products
15
What do I do if my music sounds overdriven and distorted?
Be sure that the FM station you’re using is still unoccupied as you drive
through different areas. FM signals can intrude on an unused frequency.
Be sure to set your device’s EQ to Off and adjust your stereo’s bass and
treble controls to 0. Then you can experiment with adding bass and treble
to your desired level.
I’m having trouble finding an empty FM frequency in my area.
Be sure to look in the full spectrum of FM frequencies. Try scanning to a
strong station, then back down two frequencies - for example 89.5 to 89.3.
If that frequency is taken, try scanning to the next strong station and repeat.
14
Frequently asked questions
Here you will find the most frequently asked questions and answers
about you’re your TransCast FM.
To keep the warranty valid, never try to repair the product yourself.
If you encounter problems when you use your TransCast FM, please
read the following frequently asked questions before you contact
Philips. If the problem remains unsolved, go to the Philips website
www.philips.com/welcome. When you contact Philips, make sure that
your TransCast FM is nearby and the model number and serial number
are available.
What do I do if I hear static or distortion when my music is playing?
Try setting the Listening Mode to Mono, which will improve the clarity
of your TransCast FM’s signal. Also, you may need to lower the volume
control on your portable audio device.
What do I do if my radio will only scan/seek to occupied
FM stations?
Many car radios default to scan/seek mode for tuning, so they
automatically tune to a radio station. Most of these radios can
be switched to manual tuning (consult your car or radio manual
on how to do this).
ENGLISH