Filter
Top Products
English
11
Preparations
Rear connections
The type plate is located at the rear of the
system.
A Power
● Before connecting the AC power adaptor to the
wall outlet, ensure that all other connections
have been made.
WARNING!
–For optimal performance, use only the
original AC power adaptor.
–Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B Antenna Connection
Connect the supplied FM antenna to the FM
terminal. Extend and position the FM antenna for
optimal reception.
Note:
–Position the FM antenna away from the speaker
wires to avoid electrical interference.
C Speaker connections
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
● Connect the cable of the left speaker to L (red
and black) and the cable of the right speaker to
R (red and black) as follows:
Press the clip of the red terminal and fully insert
the stripped portion of the coloured (or
marked) speaker cable into the socket, then
release the clip.
Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket, then
release the clip.
AC power adaptor
FM wire antenna
pg001-025_DC199_37-Eng 2007.11.22, 15:5211