Filter
Top Products
6
RQT8067
Preparations
Attaching the battery (When the unit is off)
The illustrations show how to attach the CGR-H702. Attach CGR-H703 in the same way.
Detaching
p
Turn the unit off before detaching the battery pack.
p
The illustrations show how to detach the CGR-H702. Detach CGR-H703 in the same way.
When not using for long periods of
time
p
Remove the battery pack (➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
p
Recharge the battery for re-use.
RELEASE
DETACH ATTACH
Clicks into place
Check to make sure it is securely fastened.
RELEASE
DETACH ATTACH
Bottom side of this unit
Battery pack
RELEASE
DETACH ATTACH
Press and hold
D
C
IN
12V
V
ID
E
O
A
U
D
IO
/O
P
T
O
U
T
1
2
3
DC IN
DC IN 12 V
%
To
household
AC outlet
AC adaptor
(included)
AC power supply cord
(included)
p
You can also use this unit without charging while
connecting the AC adaptor and the AC power supply
cord.
To conserve power
This unit consumes 0.5 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC power supply cord from the
household AC outlet.
The unit is in the standby condition (the [¦] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.
Recharging the battery (When the unit is off)
[
¦
] goes out ➜ lights
[CHG] lights ➜ goes out
Recharging time :
[DVD-LS90]: Approx. 8 hours
[DVD-LS93]: Approx. 13 hours
When finished, disconnect the AC
adaptor and the AC power supply cord.
¦
CHG
Started
Finished
Preparations