Filter
Top Products
39
RQT7921
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥Use “1”, the factory preset, under normal circumstances.
1 While OPTION menu is displayed
Press [34] to select the “REMOTE
CONTROL”.
2 Press [21] to select the code (1 or 2)
and press [MENU].
The remote control code on the unit has been set.
3 While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
When the remote control code on the remote is set, “REMOTE”
indication (l below) disappears.
The following is displayed for a few seconds on the main unit when you
use a remote control with the different code.
The unit’s remote control code
Change its code to match the unit’s (l step 3).
When a stereo and/or SAP broadcast is received, “STEREO” and/or
“SAP” appear showing the type of broadcast.
To change the audio
Press [SHIFT]i[AUDIO].
The audio changes as follows:
≥When playing a tape:
LR>L>R>Monaural audio track
^""""""""-""""b
≥While watching the television:
LR>L>R
^"""-"b
The table below shows the TV broadcast type, “MTS” settings, and
audio recording patterns.
Be sure that “MTS” is set to “MAIN” or “SAP” to record on the Hi-Fi
audio tracks.
[Note]
≥Switch to “MONO” for viewing or recording if a stereo or SAP
broadcast is impaired by poor reception.
≥To resume stereophonic recording, set “MTS” to “MAIN” or “SAP”.
When you play back recordings of stereo or SAP broadcasts, these
audio types are automatically selected. The unit may select a different
type if you start play midway through the program. Press
[SHIFT]i[AUDIO] to change the type if this occurs.
This function does not work if:
–The tape was recorded on a deck without this system.
–The tape is a recording from external equipment.
REMOTE CONTROL
Changing audio
TV
broadcast
MTS
setting
Audio track
Normal
(Mono)
Hi-Fi
Left Right
Mono MAIN or
SAP
Mono Mono Mono
Stereo MAIN or
SAP
LiR
(Mixed)
Left Right
Mono and
SAP
MAIN Mono Mono Mono
SAP Mono Mono SAP
Stereo and
SAP
MAIN LiR
(Mixed)
Left Right
SAP LiR
(Mixed)
LiR
(Mixed)
SAP
Auto bilingual choice function
SHIFT
CANCEL
AUDIO
r
[Remember] Press [VHS] first.
RQT7921-P_ENG.book 39 ページ ２００５年５月２５日 水曜日 午後３時２４分